Xantech Radio 490-85 Manuale Utente

 

 

 

08905105A 

 

  - 

3 

- 

A typical system, with a 490-85, 781RG Power Supply and 283M Emitters plugged into a 791-44 
Connecting Block, is shown in the figure below.  

 

1.  Plug the 3.5 mm stereo mini plug from the 490-85 into the 791-44 connecting block labeled “IR 

RCVR”.  

2.  Plug in the 3.5 mm mono mini plug from any of the 282, 284, 283 and 286 series Emitters into 

the jacks labeled EMITTERS on the 791-44 Connecting Block and affix the opposite end of the 
IR Sensor Window of the controlled equipment.  

3.  Plug in the 2.1mm Coaxial power plug of the 781RG Power Supply (not included) into the jack 

labeled 12VDC on the 791-44 Connecting Block. 

4.  Plug the AC end of the 781RG Power Supply into an ‘un-switched’ 120VAC outlet. 
 
 

Series

IR Receivers

 

Emitter

120 V AC

(Unswitched)

Power Supply

Amplified

Connecting Block

 Emitter

 Emitter

0.469"

1 7/8"

7 Foot 3-Conductor

Cable with Quick

Connect Mini Plug

+12 VDC
GND

XANTECH CORPORA

TION.

SYLMAR CA

 • MADE IN U.S.A.

STATUS
IR IN

Hand Held

Remote

Controlled Equipment

(mounted behind

closed cabinet doors)

490-85

(mounted on or

near cabinet in an

inconspicuous

location).

 Emitter

 Emitter

Satellite Receiver

Cable Box

AV Receiver

CD Changer

Cassette DecK