X-Micro WL-1502 Manuale Utente

 
 

 

Click to select fixed IP support on WAN interface. There 

are IP address, subnet mask and default gateway settings 

need to be done. 

If you select the fixed IP support on WAN interface, fill 

in the IP address for it. 

 

If you select the fixed IP support on WAN interface, fill 

in the subnet mask for it. 

 

If you select the fixed IP support on WAN interface, fill 

in the default gateway for WAN interface out going data 

packets. 

Click to select PPPoE support on WAN interface. There 

are user name, password, connection type and idle time 

settings need to be done. 

If you select the PPPoE support on WAN interface, fill in 

the user name and password to login the PPPoE server.   

If you select the PPPoE support on WAN interface, fill in 

the user name and password to login the PPPoE server. 

Select the connection type from pull-down menu. There 

are 

, 

 and 

 

three types to select. 

connection type means to setup the 

connection through PPPoE protocol whenever this 

X-Micro WLAN 11b Broadband Router is powered on. 

connection type means to setup the 

connection through PPPoE protocol whenever you send 

the data packets out through the WAN interface; there are 

a watchdog implemented to close the PPPoE connection 

while there are no data sent out longer than the idle time 

set. 

 connection type means to setup the connection 

through the PPPoE protocol by clicking the 

 

button manually, and clicking the 

 button 

manually. 

 

If you select the 

 and 

 

connection type, fill in the idle time for auto-disconnect 

function. Value can be between 1 and 1000 minutes. 

19