Sterling Doll BF3-600 Manuale Utente

Digital Dosing Units 

21

 

•  Press 

 a third time.  

•  The machine displays a flashing  , “g” or “lb” and a number “4”flashes on the display 

(because this is Extrusion Constant, step 3 is skipped).  

•  After the “4” flashes on the display, a number in the format xxxx.x will come up.  
•  Enter the calibration weight. If the calibration weight is unknown, enter “00.00” and 

complete the calibration procedure (section 3.6) to obtain the correct value.  Upon 

completion of the calibration procedure, the calibration weight will automatically be 

updated into the recipe.  The range of values that can be entered in this field is 00.00 to 

400.0. 

 

 

•  Press 

  again. This will activate the printing option if it is available and the number 

“6” will be displayed.  

•  After the “6” flashes on the screen, a number in the format xxx.xx will come up on the 

display.  

•  By using the arrow keys, you can choose your printer parameters. If you have not 

activated this option, skip to the next step.