StarTech.com CONYX ECS0016 Manuale Utente
Instruction Manual
19
For a User named ‘Paul’ to access serial port 2, when setting up the
SSHTerm or the PuTTY SSH client, instead of typing username = paul
and ssh port = 3002, the alternate is to type username = paul:port02 (or
username = fred:ttyS1) and ssh port = 22.
Or, by typing username=fred:serial and ssh port = 22, the User is pre-
sented with a port selection option:
This syntax enables Users to set up SSH tunnels to all serial ports with
only a single IP port 22 having to be opened in their firewall/gateway.
TCP
RAW
SSHTerm or the PuTTY SSH client, instead of typing username = paul
and ssh port = 3002, the alternate is to type username = paul:port02 (or
username = fred:ttyS1) and ssh port = 22.
Or, by typing username=fred:serial and ssh port = 22, the User is pre-
sented with a port selection option:
This syntax enables Users to set up SSH tunnels to all serial ports with
only a single IP port 22 having to be opened in their firewall/gateway.
TCP
RAW
TCP allows connections directly to a TCP socket. However while
communications programs like PuTTY also supports RAW TCP, this pro-
tocol would usually be used by a custom application
For RAW TCP, the default port address is IP Address _ Port (4000 + serial
port #) i.e. 4001 – 4016.
RAW TCP also enables the serial port to be tunneled to a remote
ECS0016 client gateway, so two serial port devices can be transparently
interconnect over a network.
RFC2217
Selecting RFC2217 enables serial port redirection on that port. For
RFC2217, the default port address is IP Address _ Port (5000 + serial
port #) i.e. 5001 – 5016.
tocol would usually be used by a custom application
For RAW TCP, the default port address is IP Address _ Port (4000 + serial
port #) i.e. 4001 – 4016.
RAW TCP also enables the serial port to be tunneled to a remote
ECS0016 client gateway, so two serial port devices can be transparently
interconnect over a network.
RFC2217
Selecting RFC2217 enables serial port redirection on that port. For
RFC2217, the default port address is IP Address _ Port (5000 + serial
port #) i.e. 5001 – 5016.
Special client software is available for Windows UNIX and Linux that
supports RFC2217 virtual com ports, so a remote host can monitor and
manage remote serially attached devices, as though they were connected
to the local serial port.
supports RFC2217 virtual com ports, so a remote host can monitor and
manage remote serially attached devices, as though they were connected
to the local serial port.