SonicWALL TZ 190 Manuale Utente

Transparent Mode in SonicOS Enhanced uses interfaces as the top level of the management 
hierarchy. Transparent Mode supports unique addressing and interface routing.

This section is divided into:

Static means you assign a fixed IP address to the interface.

Click on the Configure icon 

 in the Configure column for the Interface you want to 

configure. The Edit Interface window is displayed.

You can configure F0, F1, X0 through X9, LAN, or OPT.

If you select OPT, select LAN, WAN, DMZ, WLAN, a custom zone, or Create new zone 
for Zone.

If you want to create a new zone, select Create new zone. The Add Zone window is 
displayed. See 

 for instructions on adding a zone.

Select a Zone to assign to the interface. You can select LAN, WAN, DMZ, WLAN, or a custom 
zone. 

Select Static from the IP Assignment menu.

Enter the IP address and subnet mask of the Zone in the IP Address and Subnet Mask fields.

You cannot enter an IP address that is in the same subnet as another zone. 

Enter any optional comment text in the Comment field. This text is displayed in the Comment 
column of the Interface table.

If you want to enable remote management of the SonicWALL security appliance from this 
interface, select the supported management protocol(s): HTTP, HTTPS, SSH, Ping, SNMP, 
and/or SSH.

If you want to allow selected users with limited management rights to log in to the security 
appliance, select HTTP and/or HTTPS in User Login.

Click OK.