SonicWALL TZ 190 Manuale Utente

Pagina di 843
SonicPoint > RF Monitoring
411
SonicOS Enhanced 4.0 Administrator Guide
Enabling RF Monitoring on SonicPoint(s)
In order for RF Monitoring to be enforced, you must enable the RF Monitoring option on all 
available SonicPoint devices. The following section provides instructions to re-provision all 
available SonicPoints with RF Monitoring enabled.
Step 1
Navigate to SonicPoint > SonicPoints in the SonicWALL security appliance management 
interface.
Step 2
Click the Configure button corresponding to the desired SonicPoint Provisioning Profile.
Step 3
In the General tab, click the Enable RF Monitoring checkbox.
Next, to ensure all SonicPoints are updated with the RF Monitoring feature enabled, it is 
necessary to delete all current SonicPoints from the SonicPoint table and re-synchronize these 
SonicPoints using the profile you just created.
Step 4
Click the 
 button at the bottom right corner of the SonicPoints table.
Step 5
Click the 
 button at the top of the page.
Your SonicPoints will now reboot with the RF Monitoring feature enabled. Be patient as the 
reboot process may take several minutes.
Using The RF Monitoring Interface
The RF Monitoring interface (SonicPoint > RF Monitoring) provides a central location for 
selecting RF signature types, viewing discovered RF threat stations, and adding discovered 
threat stations to a watch list. This section provides an overview of usage and features for the 
following RF Monitoring operations:
  •
  •
  •
  •
  •