SonicWALL TZ 190 Manuale Utente
VPN > Settings
563
SonicOS Enhanced 4.0 Administrator Guide
Configuring a VPN Policy with IKE using Preshared Secret
To configure a VPN Policy using Internet Key Exchange (IKE), follow the steps below:
Step 1
Click Add on the VPN > Settings page. The VPN Policy window is displayed.
Step 2
In the General tab, select IKE using Preshared Secret from the Authentication Method
menu.
menu.
Step 3
Enter a name for the policy in the Name field.
Step 4
Enter the host name or IP address of the remote connection in the IPsec Primary Gateway
Name or Address field.
Name or Address field.
Step 5
If the Remote VPN device supports more than one endpoint, you may optionally enter a second
host name or IP address of the remote connection in the IPsec Secondary Gateway Name or
Address field.
host name or IP address of the remote connection in the IPsec Secondary Gateway Name or
Address field.
Note
Secondary gateways are not supported with IKEv2.
Step 6
Enter a Shared Secret password to be used to setup the Security Association the Shared
Secret and Confirm Shared Secret fields. The Shared Secret must be at least 4 characters
long, and should comprise both numbers and letters.
Secret and Confirm Shared Secret fields. The Shared Secret must be at least 4 characters
long, and should comprise both numbers and letters.