SonicWALL TZ 190 Manuale Utente

Refer to the SonicWALL Anti-Spyware Administrator’s Guide on the SonicWALL Web site:

 

 for complete configuration instructions. 

If your SonicWALL security appliance is running SonicOS Enhanced, you can apply 
SonicWALL Anti-Spyware to Zones on the Network > Zones page to enforce SonicWALL Anti-
Spyware not only between each network zone and the WAN, but also between internal zones. 
For example, enabling SonicWALL Anti-Spyware on the LAN zone enforces SonicWALL Anti-
Spyware on all incoming and outgoing LAN traffic.

In the Anti-Spyware Status section of the Security Services> Anti-Spyware Service page, 
click the Network > Zones link to access the Network > Zones page. You apply SonicWALL 
Anti-Spyware to a zone listed on the Network > Zones page.

To enable SonicWALL on a zone, perform these steps:

In the SonicWALL security appliance management interface, select Network > Zones. (Or from 
the Anti-Spyware Status section, on the Security Services > Intrusion Prevention page, 
click the Network > Zones link.) The Network > Zones page is displayed.

In the Configure column in the Zone Settings table, click the edit icon 

 for the zone you 

want to apply SonicWALL Anti-Spyware. The Edit Zone window is displayed.

Click the Enable Anti-Spyware checkbox. A checkmark appears. To disable SonicWALL Anti-
Spyware, uncheck the box.

Click OK.

You can also enable SonicWALL Anti-Spyware protection for new zones you create on the 
Network > Zones page. Clicking the Add button displays the Add Zone window, which 
includes the same settings as the Edit Zone window.