SMART Technologies 600i5 Manuale Utente

Changing your projector’s aspect ratio for use
with your SMART Board 690 interactive
whiteboard

Before you align the projected image on your SMART Board 690 interactive whiteboard, you must

change the native aspect ratio on your SMART UF75w projector to 16:9. You don’t need to perform

this step with any other model of interactive whiteboard. The procedure you use to change the native

aspect ratio depends on the DDP firmware version of your projector.

To determine the DDP firmware version of your projector

1. Turn on your projector.

2. Press Menu on the remote control, and then press Right five times.

3. Record the DDP firmware version in the Firmware Version row.

To change the aspect ratio of a projector with DDP firmware version 0.0.1.7

1. Using the remote control, press the following buttons quickly to access the service menu:

Down, Up, Up, Left, Up.

2. Scroll to WXGA_720P_MODE, and then press Right to select 16:9.

3. Press Menu on the remote control.

To change the aspect ratio of a projector with DDP firmware version 0.0.2.1 or later

1. Press Menu on the remote control, and then press Right twice.

2. Scroll to Native DLP Resolution, and then press Right to select 16:9.

3. Press Menu on the remote control.

C H A P T E R 2

Installing your interactive whiteboard system