SMART Technologies UF55w Manuale Utente

    English 

Turning On the Projector and Putting It 

into Idle Mode

Turning On the Projector

.  Ensure that the power cord and video signal cable are 

securely connected. The Power LED is solid Amber.

2.  Turn on the lamp by pressing “ ” on the remote control. 

The Power LED turns green.

  The startup screen displays in approximately 0 seconds. 
3.  Turn on your source. Select 

Input on the remote control 

to select an input source (VGA-1, VGA-2, Composite or

S-Video).  

The projector detects the source you select and displays the 

image.

•

If you connect multiple sources at the same time, press

Input on the remote control to switch between inputs.

Putting the Projector into Idle Mode

.  Press “ ” on the remote control to turn off the projector 

lamp. A message appears on the interactive whiteboard. 

2.  Press “ ” again to confirm your selection. If you don’t

press “ ” again, the message disappears after

 

0 

seconds.

 

 

Caution! Don’t turn on the projector immediately after 

entering Idle Mode.

The first time you

use the projector,

you can select your 

preferred language 

from the main menu 

after the startup 

screen displays.