SMART Technologies UF55w Manuale Utente

5    English 

Replacing the lamp

When the lamp life is nearing the end of use, you will receive a

warning message.

When you see this message, please contact your local reseller

or service center to change the lamp as soon as possible. 

Make sure the projector has been cooled down for at least 30 

minutes before changing the lamp. 

 

Warning: Lamp compartment may be hot! Allow it to cool down 

before changing the lamp.

 

Warning: To reduce the risk of personal injury, don’t drop the

lamp module or touch the lamp bulb. The bulb may shatter and 

cause injury if it is dropped.

 

Caution: Hot! Let unit cool for 30 minutes before removing 

lamp module cover. Do not obstruct lens. High pressure lamp 

may shatter if improperly handled. Disconnect power before 

changing lamp. Replace only with SMART Technologies 

approved lamp module.

 

 Lamps contain mercury and must be recycled or disposed 

of according to local, state or federal laws.

 

Warning: Be careful of broken glass when replacing the lamp.

Wear eye protection and gloves when replacing lamp.