Silicon Optix 50HD Manuale Utente
M
AINTENANCE
Appendix B
Maintenance
Maintenance
The Premiere 50HD DLP Projector has been constructed to provide years of opera-
tion. Refer to the following sections to maintain and troubleshoot your projector.
tion. Refer to the following sections to maintain and troubleshoot your projector.
Lamp Maintenance
The projector lamp has an average life of 2,000 hours. Maintain proper ventilation
and keep the air filter clean to keep the lamp operating throughout its lifetime. Do not
subject the projector to unnecessary vibration to excessive vibration or shock may
rupture the lamp.
and keep the air filter clean to keep the lamp operating throughout its lifetime. Do not
subject the projector to unnecessary vibration to excessive vibration or shock may
rupture the lamp.
Temperature LED
The over temperature alarm LED on the control panel alerts you when the projector
lamp becomes too hot.
lamp becomes too hot.
If the LED illuminates during operation, the lamp will shut off and the cooling fans will
continue to run for approximatedly two minutes. You should ensure that the airflow
around the projector is sufficient, and that the air filters are not clogged to ensure that
the projector has proper ventilation.
continue to run for approximatedly two minutes. You should ensure that the airflow
around the projector is sufficient, and that the air filters are not clogged to ensure that
the projector has proper ventilation.
Over temperature alarm LED