Siemens TV Converter Box G120 Manuale Utente
Automation and Drives - SCE
T I A Training Document
Page 9 of 147
Module
H01
Issued: 02/2008
Frequency Converter SINAMICS G120 on PROFIBUS DP and PROFINET
Prefacet Notes Startup with PROFIBUS Startup with PROFINET Program Example
2.
NOTES ON USING THE CPU 315F-2 PN/DP
The CPU 315F-2 PN/DP is a CPU that is shipped with two integrated interfaces.
-
The first interface is a combined MPI/PROFIBUS-DP interface that can be used on the
PROFIBUS DP as Master or as Slave to connect distributed peripherals/fieldbus devices with
PROFIBUS DP as Master or as Slave to connect distributed peripherals/fieldbus devices with
very fast response timing.
Moreover, the CPU can be programmed here by means of the MPI or also PROFIBUS DP
Moreover, the CPU can be programmed here by means of the MPI or also PROFIBUS DP
-
The second interface is an integrated PROFINET interface.
It allows for using the CPU as a PROFINET IO controller to operate distributed peripherals on
the PROFINET. The CPU can be programmed by means of this interface also!
-
At both interfaces, frequency converters and also fault-tolerant IO devices can be used.
Notes:
-
In Module H01, the CPU 315F-2 PN/DP is used as IO controller on the PROFINET and as
master on the PROFIBUS DP.
-
To operate this CPU, a micro memory card is required!
-
The addresses of the input and output modules can be parameterized in the case of this CPU.