Roku Music Player Manuale Utente
10
III. Hooking Up Your Home Network Hardware (Wired Ethernet or Wireless)
Ethernet Connection
Plug your cable into the jack provided on the right side of the rear of the unit. Connect your
Ethernet cable to a hub, switch or router on your home network. Alternatively, you can connect
SoundBridge directly to your computer (and bypass a hub/switch/router), but only with a
“crossover” cable (sold separately). Connect the other end of the cable to your network.
Ethernet cable to a hub, switch or router on your home network. Alternatively, you can connect
SoundBridge directly to your computer (and bypass a hub/switch/router), but only with a
“crossover” cable (sold separately). Connect the other end of the cable to your network.
Wireless Connection
No need to install any additional hardware into SoundBridge. Please note that most, but not
all, wireless access points are compatible with SoundBridge. You can find a list of supported
wireless hardware at www.rokulabs.com/support.
all, wireless access points are compatible with SoundBridge. You can find a list of supported
wireless hardware at www.rokulabs.com/support.
IV. Hooking Up Your Speakers or Stereo System
Connect your choice of audio cables into the back left side of SoundBridge depending on your
preferred connection option.
preferred connection option.
Audio cable connectors
Digital Audio Outputs
AC Adapter Connection
Optical
Analog 1/8” Miniplug
Wired Ethernet
Network Connection
Coax
Section 1: Getting Started