Roberts Radio MP-16CD Manuale Utente

Operating your radio - Search tuning MW

1. For MW the unit uses the external loop antenna. Position and rotate

the loop antenna for best reception.

2. Press

the

On/Off button [Standby button on front panel] to switch on

your sound system.

3. Press and release the Band button [Band/Source button on front

panel] to select MW band. The display will show the MW Tuner.

4. Press and immediately release the Tuning Up button, your radio will

scan in an upwards direction (low frequency to high frequency) and
stop automatically when it ﬁ nds a station of sufﬁ cient strength.

5. After a few seconds the display will update.

6. To ﬁ nd other stations press and release the Tuning Up button as

before.

7. To scan the MW band in a downwards direction (high frequency to

low frequency) press and hold down the Tuning Down button for 0.5
seconds and then release.

8. When the waveband end is reached your radio will recommence tuning

from the opposite waveband end.

9. Adjust

the

Volume to the required settings.

10. To switch off your radio press the On/Off button [Standby button on

front panel].

4,6