RGB Spectrum Digital Recording and Streaming System DGy 201x Manuale Utente

. . . . .

. . . . . . . . . 

The 

 tab, shown in the figure below, allows selection of the source 

to record and set the frame rate and quality of the recorded image. An 
audible alarm to warn the when the disk is approaching full capacity can 
be set.

With nothing checked, only video is recorded. Check 

to 

record audio input signals together with the video.

•

Use the pull-down menu to set the desired recording 

quality, from High to Low. When set to High the Record Bit 
Rate is set to 1.5 bits per pixel (16:1 compression). For most 
applications the Medium setting is recommended (default). The 
Medium setting provides compression of 1.0 bits per pixel 
(compression ratio 24:1). Low quality records at 0.7 bits per 
pixel (34:1 compression). 

•

: Check 

to record at the maximum 

frame rate allowable for the selected input resolution. The DGy 
will automatically compute and set the frame rate based upon 
the selected input resolution and the quality setting. Alternately, 
uncheck the box to manually set the frame rate with the 
up/down selector.

and 

 are not currently implemented on 

the DGy 201x.