RedMax RECIPROCATOR SGCZ2500S Manuale Utente

■

1. Install the engine to the driveshaft so that the

cylinder head and the stop switch may come on
the same side. 

2. Using attached four bolts, secure the connection

firmly with equal force (Torque: 25in-lbs)(Torque:
2.8 N.m.). 

Never use any screws other than those specified
by the manufacturer, or the engine can get loose,
resulting in a hazardous event. 

Tighten the screws gradually by turns.

■

1. Remove the air cleaner cover.
2. Connect the end of the throttle wire to the joint

on the top of the carburetor. (SE2)

■

• Connect the switch wires between the engine

and the main unit. Pair the wires of the same
color.

■

• Mount the handle to the shaft tube and clamp it

at a location that is comfortable to you. (SE3)

❲

❳