RedMax HC510DV Manuale Utente

20 

■ AIR CLEANER
The air cleaner is adhered with much dusts
produced by a cutting operation. At the end of day’s
operation, be sure to check and clean it as follows: 

1. Remove 2 screws above the air cleaner cover

and remove the cover.

2. Remove 2 screws above a top plate and remove

the plate.

3. Remove a main filter together with a felt filter.
4. Remove the felt filter from the main filter.
5. Remove adhered dusts on the main filter by

tapping the edge of the filter on a hard plane, for
example. 

• The main and felt filters are of dry type. Do not

wet with water nor apply oils. Those will degrade
the performance. 

• Do not apply high pressure air blows or a wire

brush to clean the main filter. These will quicken
clogging or damaging of the filter. 

6. Dusts adhered on the felt filter are removed by

gently needing it. For heavy contamination, wash
in warm detergent water and dry thoroughly.
Then reassemble to the main filter as original. 

• Clogging of air filter reduces engine

performances. Inside of an engine will quickly
wear by dusts if an air cleaner cover is not
correctly fitted or if a filter is missed, deformed,