Recoton/Advent Advent AW820 Manuale Utente

Pagina di 24
7
Turn On and Tune the Speakers
1. Use the speaker Power ON-OFF/Volume 
Control Wheel (D) to turn the speaker “ON.” 
Tuning Indicator Light (A) will illuminate red.
2. Turn the Tuning Control Wheel (B) until the 
Tuning Indicator Light changes color to green, 
indicating the speaker is tuned to the signal 
from the transmitter. If the audio source is on 
and operating, you should now hear sound.
3. Adjust volume as desired.
4. Set the Left/Mono/Right Switch (C)
accordingly (see “Setting the Speakers
for Stereo/Monaural Operation” below).
5. Repeat process for other speaker.
Note: Interference in the form of static and/or distortion can sometimes be heard.
If this occurs, confirm the transmitter/speaker adjustments and indicators. If the
problem persists, refer to the 
TROUBLESHOOTING section of this manual.
Setting the Speakers for Stereo/Monaural Operation
For stereo operation, set the Left/Mono/Right Switch (C) to “Left” on one speaker
and “Right” on the other speaker. For monaural operation at each speaker, set the
Left/Mono/Right Switch to “Mono” on each speaker 
Note: If you use one speaker at one location and the other at another location
(i.e. two different rooms), Advent recommends the “Mono” setting for best
sound reproduction.
OPTIONAL SPEAKER MOUNTING BRACKETS
Optional Speaker Mounting Brackets (S) are available to wall mount your AW820
speakers. To purchase bracket model AWB1 (includes brackets and mounting
hardware for 2 speakers), contact your retailer or call Advent Customer Service
at 1-800-732-6866.
MORE HELPFUL INFORMATION
About Fixed-Level Outputs
fixed-level, or line-level audio output is considered ideal since it provides an audio
signal unchanged by adjustments to the audio source (stereo, etc.) volume control.
OFF
POWER/VOLUME
TUNING
L
R
MONO
Tuning Control
Wheel (B)
Power On-Off/Volume 
Control Wheel (D)
Tuning Indicator 
Light (A)
Left/Mono/Right 
Switch (C)