Recoton/Advent Acoustic Research Wireless AW811 Manuale Utente

Pagina di 24
8
Hint:
If your VCR (or other audio source with RCA jacks) only has a single 
audio output, you will need another RCA “Y” cable. It differs from the “Y” 
Cable Adapter included with this speaker. It will have a single male RCA 
plug and 2 female RCA jacks. Connect the dual RCA plugs from the 
included “Y” cable adapter to the 2 female RCA jacks on the second “Y” 
cable, and then connect the single male RCA plug of the second “Y” cable 
to the single audio output of the VCR.
ii. About Variable-Level Audio Outputs:
A variable-level output, such as a headphone jack or certain RCA-type outputs,
provides an audio signal that changes with the volume level set on the audio
source. As the volume of the audio source is adjusted up and down, so is the
audio signal strength sent to the transmitter. This can affect the quality of
sound generated by the speaker, and may require an adjustment of the
volume level of the audio source to produce a signal strong enough for the
transmitter.
Hint:
On most bookshelf-type or compact stereo systems, inserting a 
headphone plug into the headphone jack results in automatic cutoff of the 
regular, or hard-wired speakers.
Hint:
Most TVs, regardless of age or price, have variable outputs. If you 
are unsure which of your TV audio outputs is fixed, refer to the TV 
instruction manual. Some TVs have outputs that can switch between 
variable and fixed. When given a choice, fixed is always recommended.