Psion Teklogix Schnellstart- Anleitung 7525 Manuale Utente

If the unit is attached to an external power supply, the hand-held LED reflects the 
battery charge status.

Table 3.1  WORKABOUT PRO LED BEHAVIOUR

3.8.2  Audio Indicators

The audio speaker provides a variety of sounds when a key is pressed, a keyboard 
character is rejected, scan input is accepted or rejected, an operator’s entry does not 
match in a match field or the battery is low. To specify how you want your WORK-
ABOUT PRO to respond under various conditions, refer to “Sound & Notifica-
tions” on page 96.
The volume keys are located above <A> and <B> on WORKABOUT PRO C 
models and to the left and right of the arrow key on WORKABOUT PRO S models. 
The increase volume key is labelled with a plus symbol 

 and the decrease 

volume key is labelled with a minus symbol 

.

3.8.2.1

Adjusting Speaker Volume On The WORKABOUT PRO C

•

Press the <BLUE> key twice to lock the key ‘on’ and then, press <A>—the 
increase volume key 

 or <B>—the decrease volume 

 key until 

the volume meets your requirements.

•

Remember to press the <BLUE> key again to turn it ‘off’.

3.8.2.2

Adjusting Speaker Volume On The WORKABOUT PRO S

•

Press the <FN/BLUE> key twice to lock the key ‘on’ and then, press the 
<RIGHT> arrow key—the increase volume key 

 or the <LEFT> 

arrow key—the decrease volume 

 key until the volume meets your 

requirements.

•

Remember to press the <FN/BLUE> key again to turn it ‘off’.

LED Behaviour

Charge Status

Solid Green

Charge complete.

Fast Blinking Green

Charge in progress. Battery charged to less than 80% 

capacity.

Slow Blinking Green

Battery charged to greater than 80% of capacity.

Solid Red

Temperature outside charge range (0° C to 50° C).

Blinking Red

Battery is not charging. Battery fault.