Psion Teklogix Network Cables 32M/64M Manuale Utente

Expanding

192

Docking Station

The docking station allows faster and more convenient

connection of the mains adapter and docking cable.
1. Connect your mains adapter to the socket marked DC at

the rear of the docking station.

2. Plug the mains adapter into your power outlet and switch

on.

3. Connect the small connector of your docking cable to the

socket marked RS232 at the rear of the docking station.

Connect the other end to the COM (RS232) port of your

PC.

RS232

Now, each time you return to your desk, you can place your

netBook onto the docking station to start charging the battery

and connect to your PC. (Start PsiWin as described in the PsiWin

section of this Guide).
To remove the netBook from the docking station, press the eject

pad in the centre to lift it clear of the connector.
For additional information, refer to

\extras\support\netBook\hardware.pdf on the CD.

Connect the RS232

cable and mains

adapter plug

Docking connector

PPPPPush here to disengage

ush here to disengage

the netBook