Psion Teklogix Vehicle-Mount Computer 8525 G2 Manuale Utente
Chapter 5: Configuration
Scanner Properties Setup
Scanner Properties Setup
144
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual
Include Check
If this parameter is enabled (set to on), the check digit is included with the decoded
bar code data.
bar code data.
Addendum
Important:
Before “Addendum” can take effect, the “Short Code” parameter
in the Options menu (see page 139) must be enabled (set to ‘on).
in the Options menu (see page 139) must be enabled (set to ‘on).
An addendum is a separate bar code, supplementary to the main bar code. Choosing
this option displays a window from which you can select one of three options.
this option displays a window from which you can select one of three options.
When Addendum is set to Disabled, the scanner does not recognize an addendum. If
this parameter is set to Optional, the scanner searches for an addendum and if one
exists, appends it to the main bar code. When the parameter is set to Required, the
scanner does not accept the main bar code without an addendum.
this parameter is set to Optional, the scanner searches for an addendum and if one
exists, appends it to the main bar code. When the parameter is set to Required, the
scanner does not accept the main bar code without an addendum.
Prefix/Suffix Chars
Prefix Char
This character, if non-zero, is added before a successfully decoded bar code.
Choosing this option displays a window in which you can assign a character.
Choosing this option displays a window in which you can assign a character.
When this window is displayed, press the key you want to insert. The
ASCII/Unicode key value of the keypress is displayed.
Pressing the [ESC] key in this dialog box resets the data to zero.
ASCII/Unicode key value of the keypress is displayed.
Pressing the [ESC] key in this dialog box resets the data to zero.