Plasmon V15 Manuale Utente

Network Address

Selects the method used to set the Internet Protocol 
(IP) address of the library, as follows:

Static – The library uses a fixed IP Address,

which is assigned in the IP Address field,
described below.

DHCP – The library uses an IP address

assigned by the network DHCP (Dynamic
Host Configuration Protocol) server.

For ease of use, Plasmon recommends using a Static 
IP address.

IP Address

Sets the IP address of the library, which acts as a 
Simple Network Management Protocol (SNMP) 
device in the network.

Subnet Mask

Sets the subnet (subnetwork) mask, a set of numbers 
that allows routing of communication to designated 
devices within the network. 
Note: This option is only displayed if the network 
address is set to Static. 

Gateway Address

Sets the default TCP/IP (Transmission Control Proto-
col/Internet Protocol) gateway address, which allows 
routing of communication outside the subnet.
Note: This option is only displayed if the network 
address is set to Static.