Plasmon V15 Manuale Utente

The following table lists some messages that can appear for the selected AIT tape drive.

From the Drive Status screens, you can view status information about the tape drives. These information
screens are updated whenever there is a change in drive status. 

To display tape drive information:

1. From the operator panel keypad, press [MENU] to display the menus. Press the down arrow 

key until “Drive Menu” appears.

2. Press [ENTER]. The “Drive 1 Menu” appears.

READY-NOTAPE

The tape drive is ready to accept a cartridge.

LOADING....

Tape is loaded

READY-TAPE

The tape drive has successfully loaded the tape and 
is ready for read/write operations.

READING

The tape drive is reading data.

WRITING

The tape drive is writing data.

TAPE IN MOTION

The drive is moving tape.

SPACE FORWARD

The tape drive is performing a forward search.

REWIND

Rewind is in progress.

ERASE

The tape drive is erasing data on the tape.

UNLOADING

The tape drive is unloading a tape.

CLEAN DRIVE

The tape drive should be cleaned at the next conve-
nient time.

CLEANING...

Cleaning is in progress.



D r i v e

M e n u

A I T



D r i v e

1

M e n u

A I T