Plasmon V15 Manuale Utente

If you report a problem to Plasmon Technical Support, you may be asked to create a library diagnostic
listing via the console interface. A diagnostic listing is created when you use a terminal emulation program
(such as HyperTerminal) to send an ASCII copy of the diagnostic buffer from the library to the host
computer. This buffer information can be used by support personnel to troubleshoot incidents with the
library.

To create a diagnostic listing:

1. Access the console interface by following the steps in the Connecting to the Console 

Interface section of this chapter.

2. From the Help screen, type dump for a library diagnostic listing. Press [ENTER].

3. Using your terminal emulation program, specify the file name for the diagnostic listing and 

specify ASCII as the file transfer type for the diagnostic data. 

 If you do not specify a path with the file name, the file is written to the
default directory on the current drive.

4. When the file is completely transferred, your terminal emulation program may require you to 

close the file and press [ENTER] to return to the console screen.

You can view the LCD password from the Configuration Information screen in the console interface. 

To view the LCD password:

1. Access the console interface by following the steps in the Connecting to the Console 

Interface section of this chapter. 

2. From the Help screen, type config and then press [ENTER]. 

3. When the Configuration Information screen appears, you can view the password next to the 

LCD password field.