Plasmon 800-102913-00 B Manuale Utente

The Archive Appliance Express can be rack mounted using a sliding rail kit available from Plasmon.
The rack mount kit works in racks with a depth of 22" to 34"  (56 to 142 cm) from front to back rails.

To install the rack mounting rails, perform the following steps:

1. Separate the sliding rail from the fixed rail by fully extending the sliding rail and releasing 

the stop latch shown below. Repeat for the other rail.

2. Attach the sliding rails to the sides of the AAE by inserting the notched ends of the sliding 

rails into the raised tabs toward the front on each side of the AAE, and attaching the rails 
with two M4, 12mm x 20 screws on each as shown below.

Short L Brackets

Long L Brackets

Sliding Rail

Fixed Rail

Push up to release 

sliding rail.

Mounting Screws

Notched End