Phonetics 1104 Manuale Utente
4.8 Call Delay
Call Delay is the programmed length of time the Model 1104
waits, following detection of an alarm, before it begins the dial-
out sequence. This applies only to the first call. (Delay time
between calls is also programmable: refer to Intercall Time,
waits, following detection of an alarm, before it begins the dial-
out sequence. This applies only to the first call. (Delay time
between calls is also programmable: refer to Intercall Time,
Section 4-11.)
The purpose for Call Delay is to allow time for personnel at the
Model 1104’s installation site to respond to and cancel an alarm
before dial-out begins. During this time, the Model 1104 will
audibly repeat its “alert condition” message (unless the Local
Voice Mute feature has been activated—refer to Section 4.9). The
default for Call Delay is 30 seconds. Call Delay can be
programmed from 0 seconds to 60 minutes (1 hour).
Model 1104’s installation site to respond to and cancel an alarm
before dial-out begins. During this time, the Model 1104 will
audibly repeat its “alert condition” message (unless the Local
Voice Mute feature has been activated—refer to Section 4.9). The
default for Call Delay is 30 seconds. Call Delay can be
programmed from 0 seconds to 60 minutes (1 hour).
4.8.1 Programming the Call Delay
To program the Call Delay:
1. Press SET.
2. Press CALL DELAY.
The Model 1104 will respond: “Enter minutes.”
3. Using the number keys, enter the minutes.
The Model 1104 recites the digits as they are pressed.
4. Press ENTER. The Model 1104 responds: “Enter seconds.”
ENTER
TONE
PM
ENTER
TONE
PM
1
CALL
DELAY
2
VOICE
REPS
3
INTERCALL
TIME
4
MAX CALLS
5
TEMP LIMITS
6
CALIBRATE
7
RECOGNITION
TIME
8
CLOCK
9
LISTEN TIME
SOUND
0
ID NUMBER
POWER
1
CALL
DELAY
SET
#
Chapter 4: Communications Programming
49