Phonetics 1104 Manuale Utente

The Model 1104 audibly recites the current status of every input.
In a Status Report, each input is first identified by its input
number, followed by a report that specifies parameters currently
affecting that input. If an input is disabled, the word “Off”
immediately follows the number recited for that input.

For example, input 3 is configured as a normally open, dry
contact input. During the Status Report:

• If disabled, the Model 1104 recites:

“Number 3—Off—OK,” for input 3.

• If enabled, the Model 1104 recites:

“Number 3—OK,” for input 3. 

In another example, input 2 is configured as a temperature input.
The current temperature is 76 degrees. During a Status Report:

• If disabled, the Model 1104 recites:

• If enabled, the Model 1104 recites:

The Input Recognition Time is the length of time an alert
condition must be present before a valid alarm exists and dial- out
is activated. This time period is programmable, from 0 minutes, 0
seconds (for immediate response) up to a period of 272 minutes, 0
seconds. If an alert condition begins and then clears within the
established Recognition Time, no dial-out will occur. When an
alert condition continues beyond the programmed Recognition
Time, the Model 1104 initiates dial-out. The default setting for
Input Recognition Time is 0 minutes, 3 seconds.

1.  Press SET.

2.  Press RECOGNITION TIME.

3.  Press the number (1 to 4) of the selected input to be

7

RECOGNITION

TIME

SET

#