Pioneer Server ML310 Manuale Utente
Removal and replacement procedures 36
Channel A
Channel A
Channel B
Channel B
Total memory
Mode
Slot 1
Slot 2
Slot 3
Slot 4
1 GB
1 GB
2 GB
2 GB
6 GB
Dual-channel
interleaved
interleaved
2 GB
2 GB
2 GB
2 GB
8 GB
Dual-channel
interleaved
interleaved
Processor assembly
IMPORTANT: To avoid damage to the processor and system board, only authorized technicians trained
by HP should attempt to replace or install the processor in this server.
To remove the component:
1.
Power down the server (on page
2.
Remove the bezel (on page
3.
Remove the access panel ("
4.
Remove the air baffle ("
5.
Disconnect the fan cable from the system board.
6.
Remove the heatsink fan assembly.
CAUTION: Heatsink retaining screws should be removed in diagonally opposite pairs (in an "X" pattern).
CAUTION: The pins on the processor socket are very fragile. Any damage to them may require replacing
the system board.