Philips Over The Range Microwave Oven 3164965063 Manuale Utente

Printed in China

＂

2

/

1

-

4

3/8＂

3/8＂

3/8＂

3/8＂

13-3/8＂

8-1/4＂

2＂

2＂

12-1/2＂

6-1/4＂

＂

2

3

/

7

2

-

9

＂

4

/

1

-

4

3/8＂

3/8＂

3/8＂

2＂

1/2＂

13-3/8＂

NOTE: IT IS VERY IMPORTANT TO

READ AND FOLLOW THE DIRECTIONS

IN THE INSTALLATION INSTRUCTIONS

BEFORE PROCEEDING WITH THIS

REAR WALL TEMPLATE.

This Rear Wall Template serves to position the bottom 

mounting plate and to locate the horizontal exhaust 

outlet. 

1. Use a level to check that the template is positioned 

    accurately. 

2. Locate and mark at least one stud on the left or 

    right side of the centerline.

It is important to use at least one wood 

screw mounted firmly in a stud to support the weight 

of the microwave. Mark two additional, evenly spaced 

locations for the supplied toggle bolts. 

3. Drill holes in the marked locations. Where there is 

    a stud, drill a 3/16" hole for wood screws. For holes 

    that do not line up with a stud, drill 5/8" holes for 

    toggle bolts. 

DO NOT INSTALL THE MOUNTING PLATE

AT THIS TIME. 

4. Remove the template from the rear wall. 

5. Review the Installation Instruction book for your 

    installation situation. 

Locate and mark holes to align with holes in the 
mounting plate. 
IMPORTANT: 
LOCATE AT LEAST ONE STUD ON EITHER SIDE OF 
THE CENTERLINE. 
MARK THE LOCATION FOR 2 ADDITIONAL, EVENLY 
SPACED TOGGLE BOLTS IN THE MOUNTING PLATE
AREA.

Locate and mark holes to align with holes in the 
mounting plate. 
IMPORTANT: 
LOCATE AT LEAST ONE STUD ON EITHER SIDE OF 
THE CENTERLINE. 
MARK THE LOCATION FOR 2 ADDITIONAL, EVENLY 
SPACED TOGGLE BOLTS IN THE MOUNTING PLATE
AREA.

Part No.:316902476

Part No.:316902475

EN-24

 

PN: 261800316212