Pelco NET104A Series C2900M-B Manuale Utente
46
C2900M-B (1/03)
Network Settings Configuration Page
Figure 27. Network Settings Configuration Page
Network and routing information make up the Network Settings configuration page. The following
table describes the configuration items.
table describes the configuration items.
Table C. Network Settings
Configuration
Default Setting
Description
Item
IP address
192.168.0.1
Enter a unique IP address that is valid for your network.
The pre-configured default IP address allows for easy
configuration in closed environments. You can use a
crossed cable to directly connect to a PC. Also, the PC’s IP
address and subnet mask must match the default IP
address.
The pre-configured default IP address allows for easy
configuration in closed environments. You can use a
crossed cable to directly connect to a PC. Also, the PC’s IP
address and subnet mask must match the default IP
address.
NOTE: Changing the IP address also affects the current
browser connection. You will have to enter the new URL to
regain connectivity to the unit.
browser connection. You will have to enter the new URL to
regain connectivity to the unit.
Subnet mask
255.255.255.0
Enter a valid subnet mask for your network, if subnets are
in use.
in use.
Gateway IP
none
Enter the IP address of the router. This is typically used in a
WAN environment.
WAN environment.
(Continued on next page)