Samsung WM-202 Manuale Utente

If you wish to completely reset your radio to its initial state this may be 
performed by following this procedure. By performing a factory reset, all 
user entered settings will be erased.

1.  Access the main menu by pressing the Menu button until the 'Main 

menu' option is shown, then select this with the Tuning/Select 
control. 

2. Rotate 

the 

Tuning/Select control until 'System settings' is selected 

on the display. Press the control to enter the system settings menu. 

3. Rotate 

the 

Tuning/Select control until 'Factory Reset' is selected on 

the display then press the control. Rotate the Tuning/Select control 
and highlight 'YES' to proceed.

 

If you do not wish to carry out a system reset, highlight 'NO' and then 
press the control. The display will revert to the previous menu.

4.  With 'YES' highlighted, press the Tuning/Select control. A full reset 

will be performed. The station list together with any preset stations 
will be erased and your wireless network connection details will be 
lost. All confi guration settings will be restored to their defaults, the 
clock and alarms will be reset.

In case of malfunction for any reason, reset the product as described 
above to resume normal operation. It may be necessary in some cases 
to disconnect the mains power and remove the batteries, then reconnect 
power after 10 seconds.

In case of malfunction due to electrical fast transient (burst), reset the 
product as above (reconnection of the power source may be required) to 
resume normal operation.

1

1-4