Trek TREK-725 Manuale Utente
47
Chapter 4
5.
If the TREK-725 is a node on a LAN with fixed IP addressing, the
user has to ask MIS for a subnet mask and specific IP address. The
user then enters them into the associated fields of the Properties
Dialog that is opened by selecting the properties item on the pop-up
menu described in step 3 above. Use “System Configura-
tor\Misc\Registry\Save” on the desktop to save this changed regis-
try. Reboot the system. The Ethernet functions are available as in
the previous configuration.
user has to ask MIS for a subnet mask and specific IP address. The
user then enters them into the associated fields of the Properties
Dialog that is opened by selecting the properties item on the pop-up
menu described in step 3 above. Use “System Configura-
tor\Misc\Registry\Save” on the desktop to save this changed regis-
try. Reboot the system. The Ethernet functions are available as in
the previous configuration.
Figure 4.18: Networking via Ethernet
4.5.2 Networking via PPP
The TREK-725 supports the PPP protocol. To set up and use the PPP pro-
tocol, follow the steps below.
tocol, follow the steps below.
1.
Click “Start/Settings/Network and Dial-up Connections”.
2.
Make a new connection. When the dialog box appears, choose
“Dial-Up Connection”. Click “Next”.
“Dial-Up Connection”. Click “Next”.
3.
Click “Configure” to set up the device according to the specifica-
tion of your modem, and then click “OK” (in the top-right corner of
the window).
tion of your modem, and then click “OK” (in the top-right corner of
the window).
4.
Click “Next”. Type the telephone number in the “Phone Number”
window. Press “Finish” to complete the setup process.
window. Press “Finish” to complete the setup process.