Trekstor CK-7W Manuale Utente

To mount the remote control button, use the hook and loop tape 
provided. First detach the two parts of the pads from each other. Attach 
the pad with the loops first: peel off the protective sheet from the 
adhesive side (A) and attach the pad to the desired location in your car 
(B). Make sure that the surface where you intend to attach the pad is dry 
and free from dirt and dust.

Attach the pad with the hooks next: peel off the protective sheet from 
the adhesive side (C) and attach the pad to the underside of the remote 
control button.

Press the remote control button (D) firmly onto the loop pad mounted in 
the car.

To ensure good acoustic quality, mount the loudspeaker so that it is 
pointed in the user’s direction. We recommend that you mount the 
loudspeaker a minimum distance of 1 metre away from the microphone 
to avoid feedback.

The Advanced Car Kit also supports connection to a compatible car radio 
system. If you wish to use the car radio installed in your vehicle with the 
Advanced Car Kit for audio output, ask your service technician for 
professional advice.

Connect the loudspeaker or a compatible car radio system to the 
"SPEAKER" output.

Careful selection of the mounting location of the microphone can 
increase the quality of voice transmission.

Mount the microphone approx. 30 cm from the driver’s head, and 
position it so that it points towards the driver’s mouth. Experience has 
shown that the best locations are near the rearview mirror or the sun 
visor. We recommend that you keep the microphone a minimum 
distance of 1 metre away from the Advanced Car Kit phone loudspeaker 
to avoid feedback.