Transition Networks BFFG1XXX-1XX Manuale Utente

 

 

  

Transition Networks 

  

Cautions indicate that there is the possibility of poor equipment performance or 
damage to the equipment. The symbol below identifies cautions 

Warnings indicate that there is the possibility of injury to person. 

 

Cautions and Warnings appear here and may appear throughout this manual where 
appropriate. Failure to read and understand the information identified by the symbol 
could result in poor equipment performance, damage to the equipment, or injury to 
persons. 

 

   When handling chassis Devices observe electrostatic discharge precautions. 

This requires proper grounding; i.e., wear a wrist strap. 

  Copper based media ports, e.g., Twisted Pair (TP) Ethernet, USB, RS232, 

RS422, RS485, DS1, DS3, Video Coax, etc., are intended to be connected to 
intra-building (inside plant) link segments that are not subject to lightening 
transients or power faults.   

 

Copper based media ports, e.g., Twisted Pair (TP) Ethernet, USB, RS232, 
RS422, RS485, DS1, DS3, Video Coax, etc., are NOT to be connected to 
inter-building (outside plant) link segments that are subject to lightening. 

  DO NOT install the Devices in areas where strong electromagnetic fields 

(EMF) exist. Failure to observe this caution could result in poor Device 
performance. 

  

  Use of controls, adjustments or the performance of procedures other than 

those specified herein may result in hazardous radiation exposure.  

  Visible and invisible laser radiation when open. DO NOT stare into the beam 

or view the beam directly with optical instruments. Failure to observe this 
warning could result in an eye injury or blindness.  

 

iv