Panasonic DMR-EZ485VK Guida Al Funzionamento

86

No sound.
Low volume.
Distorted sound.
Cannot hear the desired 
audio type.

  Check the connections and the “Digital Audio Output” settings. Check the 

input mode on the amplifier if you have connected one.

61, 72

  Check if TV is muted.

−

  Check if amplifier is muted.

−

  Press [AUDIO] to select the audio.

31, 38

  Sound is not output while fast-forwarding during chasing playback and 

simultaneous record and playback.

−

  Set “V. Surround Sound” in the Audio menu to “Off” in the following cases:

–

  When using discs that do not have surround sound effects, such as 

Karaoke discs

–

  When playing analog multilingual broadcast recordings

51

 The sound effects will not work when the bitstream signal is output from the 

HDMI AV OUT terminal or the DIGITAL AUDIO OUT terminal.

−

 Audio may not be output due to how files were created. (DivX)

−

 Audio may not be heard when more than 4 devices are connected with 

HDMI cables. Reduce the number of connected devices.

−

 When the DIGITAL AUDIO OUT terminal is used for audio output and the 

unit is connected to the television with an HDMI cable, set “HDMI Audio 
Output” to “Off” in the Setup menu.

66

 Depending on the connected equipment, the sound may be distorted if this 

unit is connected with an HDMI cable.

−

Cannot switch audio. 

  You cannot change the audio type when a DVD-R, DVD-R DL, DVD-RW 

(DVD-Video format), +R, +R DL, or +RW disc is in the disc tray.

−

  You cannot change the audio type when playing a recording of an analog 

multilingual broadcast on a DVD-R, DVD-R DL, DVD-RW (DVD-Video 
format), +R, +R DL or +RW disc. You can select “Main” or “Secondary Audio 
Program (SAP)” in “Multi-channel TV Sound (Analog)” in the Setup menu 
before recording.

23, 25, 

61

  Only one language channel is recorded from digital multilingual broadcasts, 

so you will be unable to change languages during playback.

25

  You have used a digital connection. Set “Dolby Digital” to “PCM” or connect 

using an audio cable (analog connection).

61, 72

  There are discs whose audio cannot be changed due to how the disc was 

created.

−

Page

DMR-EZ48VP.indb   86

DMR-EZ48VP.indb   86

2007/12/13   20:44:31

2007/12/13   20:44:31