Toshiba Webcam R30-A Manuale Utente

54

Getting Started

Removing a memory module

Always make sure your computer and AC adaptor have 
adequate ventilation and are protected from overheating 
when the power is turned on or when an AC adaptor is 
connected to a power outlet (even if your computer is in 
Sleep mode). In this condition, observe the following:

❖

Never cover your computer or AC adaptor with 
any object.

❖

Never place your computer or AC adaptor near a 
heat source, such as an electric blanket or heater.

❖

Never cover or block the air vents including those 
located at the underside of the computer.

❖

Always operate your computer on a hard flat 
surface. Using your computer on a carpet or other 
soft material can block the vents located at the 
underside of the computer.

Overheating your computer or AC adaptor could cause 
system failure, computer or AC adaptor damage or a fire, 
possibly resulting in serious injury.

19

Reconnect the cables.

20

Restart the computer.

TECHNICAL NOTE: You must have at least one memory 
module installed for the computer to work.

You can now continue setting up the computer. When the 
operating system has loaded, you can verify that the 
computer has recognized the additional memory module.

If you are adding extra memory after setting up the 
computer, verify that the computer has recognized it 
correctly as described in 

.

Removing a memory module

If you need to remove a memory module:

1

 in 

 to shut down the computer and open the 

memory module slot cover.