Toshiba MJ-1103 Manuale Utente
MJ-1103/1104
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
DESCRIPTION OF OPERATIONS
3 - 4
3.1.3
Simple Stack Mode
In this mode the transported paper is exited to the stationary tray or the movable tray directly, without
any extra operation.
During the exiting process to the movable tray, the shutter is lifted not to bring the paper into the finish-
ing tray side and the movable tray is lifted up and down according to the stack height of paper.
any extra operation.
During the exiting process to the movable tray, the shutter is lifted not to bring the paper into the finish-
ing tray side and the movable tray is lifted up and down according to the stack height of paper.
[A] Finisher paper feeding section
Paper transported from the junction box is then caught with the entrance roller driven by the entrance
motor (M1).
When paper is exited to the stationary tray, the gate solenoid (SOL4) is turned ON to move down the
gate flapper. When exited to the movable tray, the gate solenoid (SOL4) is turned OFF to transport the
paper to the buffer tray.
The paper transport is detected by the entrance sensor (S1).
Paper transported from the junction box is then caught with the entrance roller driven by the entrance
motor (M1).
When paper is exited to the stationary tray, the gate solenoid (SOL4) is turned ON to move down the
gate flapper. When exited to the movable tray, the gate solenoid (SOL4) is turned OFF to transport the
paper to the buffer tray.
The paper transport is detected by the entrance sensor (S1).
Fig. 3-5
Entrance motor
Gate solenoid
Gate flap
Entrance roller
Entrance sens