Toshiba MJ-1103 Manuale Utente

MJ-1103/1104

DISASSEMBLY AND INSTALLATION

4 - 1

4. DISASSEMBLY AND INSTALLATION

4.1

Covers

[A] Stationary tray

(1) Open the stationary tray.
(2) Loosen 2 screws each from the front and

back side tray, and remove 2 right side
screws.

(3) Lift the stationary tray upward to take off

while pulling the jam access lever.

Notes:

• Be sure to install or remove the stationary

tray with the stationary tray being opened,
otherwise the upper exit roller guide may
be damaged.

• Be sure not to damage the actuator of the

stationary tray paper-full sensor.

Fig. 4-1

Notes:

• Be sure not to lose 4 pins of the buffer

unit-1.

• Before installing the stationary tray, adjust

the installing positions of the 4 pins of the
buffer unit-1 to the center position.

Fig. 4-2

Jam access lever

Stationary

tray

Actuator

Buffer unit-1