The Siemon Company MT-RJ Manuale Utente
W W W
.
S I E M O N
.
C O M
FIBRE PRODUCTS
Siemon provides a complete line of MT-RJ Small Form Factor (SFF) interconnect
products — providing the utmost in versatility and performance. Siemon MT-RJ
connectors pack all the benefits of duplex fibre optic performance in a compact “RJ”
style design. Two key features have been incorporated into Siemon’s MT-RJ system.
The first is the hinged adapter latch which allows for easy corrections of polarity
errors. The second feature is the lead-in tube of both the 62.5 and 50 micron
connectors which utilizes a dual entrance tube to facilitate easier routing of fibres
into the connector.
No one offers a wider variety of MT-RJ solutions for the work area or the
telecommunications room. Siemon MT-RJ work area adapter products are
compatible with our current line of MAX
products — providing the utmost in versatility and performance. Siemon MT-RJ
connectors pack all the benefits of duplex fibre optic performance in a compact “RJ”
style design. Two key features have been incorporated into Siemon’s MT-RJ system.
The first is the hinged adapter latch which allows for easy corrections of polarity
errors. The second feature is the lead-in tube of both the 62.5 and 50 micron
connectors which utilizes a dual entrance tube to facilitate easier routing of fibres
into the connector.
No one offers a wider variety of MT-RJ solutions for the work area or the
telecommunications room. Siemon MT-RJ work area adapter products are
compatible with our current line of MAX
®
and CT
®
products, MX-SM
®
Boxes, and
Fibre Outlet Boxes (FOB2), providing a range of solutions as well as the ability to
mix copper and fibre in a single faceplate or service box. In the
telecommunications room, our MT-RJ Quick-Pack
mix copper and fibre in a single faceplate or service box. In the
telecommunications room, our MT-RJ Quick-Pack
™
adapter plates fit into our
popular line of RIC3, SWIC3, and FCP3 fibre enclosures.
MT-RJ CONNECTOR PRODUCTS
The Siemon MT-RJ Field Termination Kit (FTERM-
MT) is used to terminate connectors in the field
MT) is used to terminate connectors in the field
Higher density — MT-RJ connectors are one-third
the size of duplex SC connectors, providing
significantly higher density
the size of duplex SC connectors, providing
significantly higher density
MT-RJ MAX Modules with MT-RJ Jumper
Proven no epoxy/no polish termination
method terminates in less than 2 minutes —
less than 1 minute per fibre
method terminates in less than 2 minutes —
less than 1 minute per fibre
Optical performance meets
ANSI/TIA/EIA-568-B.3 and
ISO/IEC 11801 Ed 2.0
requirements
ANSI/TIA/EIA-568-B.3 and
ISO/IEC 11801 Ed 2.0
requirements
Two boots are included to enable
termination of either 3.0mm
round duplex cable or 900µm
buffered fibre
termination of either 3.0mm
round duplex cable or 900µm
buffered fibre
Snagless latch — MT-RJ
connectors use the familiar “RJ”
style latch found on modular plugs
connectors use the familiar “RJ”
style latch found on modular plugs
Factory-polished connectors assure
optimum performance and reliability
optimum performance and reliability