Telit Wireless Solutions GE863 Manuale Utente
GE863-GPS Software User Guide
1vv0300724 Rev. 2 - 24/01/07
To answer the call:
• Send command
• Send command
ATA<cr>
• wait
for response:
Response
Reason
Action
CONNECT 9600
The incoming call was a DATA
one and called modem is now
on line.
one and called modem is now
on line.
exchange data..
ERROR
No incoming call is found, call
may have been lost
may have been lost
call lost
NO CARRIER
The incoming call was a DATA
one and the modem
handshaking has not been
successful
one and the modem
handshaking has not been
successful
check for mobile registration
and signal strength and modem
settings.
and signal strength and modem
settings.
OK
The incoming call was a VOICE
call and is now active.
call and is now active.
proceed ahead
TIP: The call is answered with the appropriate type (VOICE or DATA) regardless of the
+FCLASS setting active. To distinguish between Data and Voice see the command response or
the extended format incoming call indication.
+FCLASS setting active. To distinguish between Data and Voice see the command response or
the extended format incoming call indication.
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 29 of 109