Tascam RC-601mkII Manuale Utente

The frame digit in the time display that is displayed in the 
display window can be cleared. 

Select from the following using menu No. 18 (“FRAME”):

ON (default setting): The frame digit is displayed.

OFF: The frame digit is not displayed.

AUTO: The frame digit not displayed only during online 

playback.

When the timer play function is set to ON, monitor playback 
is started automatically when the remote control unit is 
turned ON. 

Select timer play function ON/OFF using menu No. 07 
(“TIMER”). 

Selection: OFF (default setting), ON

To view the total time that the CD mechanism motor in 
the remote control player has been used, select the item 
following menu No. 23 (before menu No. 01) without a menu 
No. 

The menu example above shows that the total motor time is 
234 hours. 

The rear panel of the CD-601MKII is provided with the 
REMOTE (PARALLEL) terminal (37-pin D-Sub connector) 
and the REMOTE (SERIAL) terminal (15-pin D-Sub 
connector, RS-232C-compliant) for external control.

For example, fader start/stop and event start operations can 
be performed using the REMOTE (PARALLEL) terminal. 
The REMOTE (SERIAL) terminal can be used to control the 
CD-601MKII from a computer. (Note, however, that when 
the remote control unit RC-601MKII is used, the REMOTE 
(SERIAL) terminal is exclusively for the remote control unit, 
and cannot be used for other applications.)

For details on external control, refer to the Owner’s Manual 
for the CD-601MKII.

RC-601MKII_Eng.indd   27

3/24/2005   2:38:31 PM