Tamron Satellite Radio IC-R10 Manuale Utente
1. Set up
q
Set the frequency you want to program in VFO mode.
w
While pushing [FUNC], push [
(V/M)
MW] to enter mem-
ory write mode.
2. BANK and memory channel setting
q
While pushing [FUNC], rotate [DIAL] to select the BANK
you want to program (p. 24).
you want to program (p. 24).
w
Rotate [DIAL] or push 2 digit keys to select the memory
channel you want to program (p. 24).
channel you want to program (p. 24).
4
MEMORY MODE
27
■
Programming a memory channel — 3
This is the easiest way to memorize the received frequency,
mode and other information along with memory, BANK
names, scanning condition, etc. in one operation.
mode and other information along with memory, BANK
names, scanning condition, etc. in one operation.
3. Programming details
q
Push [EDIT] to enter memory programming mode.
w
Rotate [DIAL] or enter the alphanumeric characters via
the keypad to program a memory name.
the keypad to program a memory name.
• When you enter channel names with [DIAL] or a character as-
signed to the same key, push [ENT] before you enter the next
character to change the digit (see page 72 for alphanumeric
key assignments).
character to change the digit (see page 72 for alphanumeric
key assignments).
1
2
2