TANDBERG CODIAN MCU 4500 Manuale Utente
84
You can add a custom banner image to any auto attendant configured on the MCU as follows:
1. Go to
.
2. Click the
tab.
3. Click the name of a configured auto attendant.
4. Click the
4. Click the
tab.
5. Refer to the table below to determine the most appropriate settings.
Chooses the default Codian MCU graphic to use
for your banner.
for your banner.
The custom banner identified for this auto
attendant. Click
attendant. Click
to remove this
graphic as the banner. Click
after
uploading a new graphic.
Nothing displays here until you upload the
custom graphic as described below.
custom graphic as described below.
The custom graphic to be used for a banner. Click
to locate the file on your hard drive.
The image file can be a JPEG, GIF or Windows
BMP format with a maximum size of 1600 x
1200 pixels. If the file is smaller than this size, the
MCU will scale it to fit in the auto attendant's
banner area. Click
BMP format with a maximum size of 1600 x
1200 pixels. If the file is smaller than this size, the
MCU will scale it to fit in the auto attendant's
banner area. Click
to display.