Optiview MPEG-4 Manuale Utente

 

User’s Manual

 

 

 

21

The Record Setup menu allows user to set recording quality, recording 
schedules, and other recording parameters. To setup the recording quality 
and schedules, you have to enter the OSD Setup Menu with correct 
Administrator's password. In the Main menu, move the cursor to <Record 
Setup> and press ENTER; the following menu is displayed. 
 

Record Setup 

1. Record Mode 
2. Schedule Setup 
3. Preset Config 
4. ezRecord Setup 
5. Circular Recording 
6. Purge Data 

720×240@60PPS   

     

Standard   

     

ON   

 

The Record Mode is for selecting resolution and recording rate. The relative 
record settings, such as preset configuration, will follow the record mode 
setting. In normal circumstance, we recommend you to select 
<720x240@60PPS>, the default, for this item. 
 
Move the cursor to <Record Mode> and press ENTER, then select a Record 
mode using UP / DOWN keys. 
 

NOTE: After changing the Record Mode setting, the warning 

message “This will FORMAT ALL HARDDISKS and LOAD THE 

FACTORY DEFAULT CONFIG!” will be shown on the screen. Press 
ENTER to confirm the selection, then the unit starts to format the 
hard disks and load the factory default settings, or press ESC to 
abort. We strongly recommend to backup your programmed 
configuration before making any changes on Record Mode settings. 

 

NOTE: The total PPS is shared by viewing windows (by 4, 8 or 16 
windows, depends on the model you have purchased), which 

means, even one window hasn’t connected with a camera and 
displays no video, that window still wastes pps. But if you select 
<ezRecord> for setting the unit, those windows with no cameras 
connected to them will not be recorded, in other words, the pps will 
not be wasted.