Optiview MPEG-4 Manuale Utente

 

User’s Manual

 

 

 

35

The MPEG-4 DVR allows user to set preset positions; the amount of preset 
points depends on the dome manufacturer.   
 
Follow the steps to set preset points. 
•  Press a Channel key to view the corresponding camera in full screen. 
•  Then press DOME to enter dome control mode. 
•  Use Direction keys to position the dome camera to desired position. 
•  Press 2 to view the dome control Hint Screen; press 2 again to toggle the 

Hint Screen. 

 

Hint Screen 

DOME / ESC: Exit 
MODE / PLAY: Iris Open / Close 
SEQ / FREEZE: Focus Near / Far 
MENU / SEARCH: Zoom In / Out 
ENTER: Auto Focus / Iris 
◄▲▼►: Pan / Tilt 
CH1: Set / Go Preset 
CH2: Hint Screen On / Off 
 

Dome Control 

 
•  Press 1 to access the Set/Go Preset function. The Dome Preset menu is 

displayed. 

 

Dome Preset 

Index 

1 
2 
3 
4 
5 
6 
7 

Set Preset

NO
NO
NO
NO
NO
NO
NO

Go Preset 

NO 
NO 
NO 
NO 
NO 
NO 
NO 

 
•  Use UP / DOWN keys to select the desired preset number from the menu. 
•  Set the <Set Preset> of the selected preset number to <YES>, and press 

ENTER to save the position. Now the preset is set and ready to call.