Optimus 32-1159 Manuale Utente
5
CONNECTIONS
Caution: Do not plug in the power
cord until all other connections are
complete.
cord until all other connections are
complete.
CONNECTING ANOTHER
AUDIO SOURCE TO THE
INPUT JACKS
AUDIO SOURCE TO THE
INPUT JACKS
You can connect another audio
source (such as a stereo VCR or CD
player) so you can sing along with the
audio source’s sound. Connect the
source’s stereo audio output jacks to
the system’s
source (such as a stereo VCR or CD
player) so you can sing along with the
audio source’s sound. Connect the
source’s stereo audio output jacks to
the system’s
AUX IN L
and
R
jacks.
Note: If your audio source does not
have AUX OUT L and R jacks, but has
only a headphone jack (such as on a
portable tape or CD player), use a
shielded Y-adapter cord with phono
jacks on each end (such as Cat. No.
42-2475). Connect the single-plug end
to the audio source’s headphone jack,
and connect the other end’s two
phono plugs to the system’s
have AUX OUT L and R jacks, but has
only a headphone jack (such as on a
portable tape or CD player), use a
shielded Y-adapter cord with phono
jacks on each end (such as Cat. No.
42-2475). Connect the single-plug end
to the audio source’s headphone jack,
and connect the other end’s two
phono plugs to the system’s
AUX IN L
and
R
jacks.
CONNECTING AN AUDIO
COMPONENT TO THE
OUTPUT JACKS
COMPONENT TO THE
OUTPUT JACKS
You can connect an audio component
(such as a PA system amplifier) to the
system’s
(such as a PA system amplifier) to the
system’s
AUX OUT L
and
R
jacks. The
AUX OUT L
and
R
jacks let you hear
the system’s sound through the com-
ponent.
ponent.
CONNECTING AN
EXTERNAL SPEAKER
EXTERNAL SPEAKER
You can connect an external 20-watt
stereo speaker with 8-ohm impedance
to the system’s
stereo speaker with 8-ohm impedance
to the system’s
EXT. 8OHM SPEAKER
jack for stereo effect.
32-1159.fm Page 5 Monday, August 9, 1999 2:38 PM