ooma Hub Manuale Utente

24

The following instructions are also found in the Quick Start Guide, but are provided here in more detail. 

The majority of ooma installations are covered by the following instructions. If you find your situation is not 

covered, see the 

 section or visit our support website http://www.ooma.com/support 

online for more information. 

Before you install your new ooma system, you must first activate your ooma Hub on the ooma website at:           

http://www.ooma.com/activate.  After you’ve activated the ooma Hub, take a minute to make sure you have 

all the materials you’ll need, and to decide where you want to install your ooma equipment.

What You Need In Your Home 
To install the ooma system, you will need to have a high-speed (DSL, cable or fiber-optic) Internet connection. 

Dial-up Internet connections are not fast enough to support the ooma service. The ooma system also does not 

support satellite or wireless broadband connections.

What You Need from ooma 
Every installation will include one ooma Hub™ device, the main ooma unit which supports one phone. To 

extend your ooma service to other phones in the house, install an ooma Scout™ device on each additional 

home phone that you want to use with your ooma service. These smaller ooma devices act as satellites, 

connecting to the ooma Hub through your home phone wiring, and drawing upon its power and functionality.

The ooma Hub supports up to four ooma Scout devices. If you have a phone which cannot be connected to 

an ooma Hub or ooma Scout, it must be disconnected and set aside. Additional ooma Scout devices can be 

purchased on the ooma website.