Quantum Audio DAT72 Manuale Utente
Introduction
Features
12
Features
The following list summarizes the key features of the DDS-4 and DAT 72 drives.
•
Compatibility
•
DDS-4: Supports DDS-2, DDS-3, and DDS-4 recording formats.
•
DAT 72: Supports DDS-3, DDS-4, and DDS 5
th
Generation recording formats.
•
LVD / Ultra Wide SCSI connection
•
Three convenient form-factors:
•
3.5-inch internal form-factor for installation in a 3.5-inch half-height space
•
3.5-inch half-height drive factory-installed with 5.25-inch mounting rails and bezel for
installation in a 5.25-inch half-height space
installation in a 5.25-inch half-height space
•
External subsystem with built-in, auto-sensing, worldwide power supply
•
Support for various native data-storage capacities (see Table 1 on page 13)
•
High-speed transfer rates for fast backups (see Table 1 on page 13)
•
Advanced onboard DDS-DC hardware using Lempel-Ziv (DCLZ) data-compression, doubling
the drive’s uncompressed capacity (e.g., a 20 GB uncompressed drive can be 40 GB with
compression). See Table 1 on page 13.
the drive’s uncompressed capacity (e.g., a 20 GB uncompressed drive can be 40 GB with
compression). See Table 1 on page 13.
•
High-performance SCSI burst transfer rates
•
Three levels of error-correction code (ECC) and four-head design for read-after-write (RAW)
error detection and correction (uncorrectable error rate of less than 1 in 10
error detection and correction (uncorrectable error rate of less than 1 in 10
15
bits)
•
“Flying” preamplifier for greater signal-to-noise ratio
•
Flash memory to store setup parameters and enable field firmware upgrades
•
Automatic power-on self-test
•
State-of-the-art sealed drive mechanism and tape handling components for improved immunity
to airborne contaminants and extended media life
to airborne contaminants and extended media life